Tech FrontPage

 

 

Refurbished Huntron Tracker 2000

 

Refurbished Huntron Tracker 2000

 

(We are the only source of used Huntron 2000 in Malaysia)

The inherent limitations of digital-domain troubleshooting is that the accuracy is limited to the resolution from one sampling point to the next. Analog-domain has no such limitation. Any sudden burst of activity can be viewed in the analog-domain, which might not be captured by a slow scanning digital sampling.

Most of our refurbished units are almost new and usually comes from storage rooms where equipments just sit there as backup or standby. We work closely with Vanguard  Electronic  Sdn Bhd,  the exclusive distributor in Malaysia for Huntron to give customers 6 months warranty for all units purchased from us.

 

Refurbished Huntron Tracker 2000

 

Huntron Tracker 2000 Description

The Huntron Tracker 2000 was the longtime mainstay of the Huntron benchtop product line. Thousands of Tracker 2000s were sold over the years with the last ones being manufactured in late 2003.

Perfect for finding leakage or substrate damage. Troubleshoot optocouplers and other gate-fired devices. Compare Multichannel outputs. Test components and boards without power - ideal for catastrophic failures. Get picture of a components overall health - including intermittent problems. Test gate-fired devices with a built-in pulse generator. Non-destructive testing

  • Built-in pulse generator - Lets you thoroughly troubleshoot gate-fired devices such as SCR's, TRIACs and optocouplers
  • Easy-to-view CRT display - Displays analog signatures that help you analyze whether a board or component is good, bad or marginal
  • Powerless testing; power to the circuitry you are testing is turned off - You will avoid an accidental short that could cause further damage to the circuit or components under test

 

Huntron 2000 Specification:

Range

Vs  (Vpk)

Zs  (k ohms)

Isc (m Arms) Pmax (mW) Pdiode (mW)
High
60 74 0.6 6 0.2
Medium 2
20 27 0.6 2 0.2
Medium 1
15 1.2 8.5 23 2
Low
10 54 ohms 132 232 33

 

Input Selection A, B, Alternate (variable rate)
Test Frequencies 50/60 Hz, 400 Hz, 2000 Hz
Range Selections Manual or Auto Scan, High Range Lockout
Alternation Rate Adjustable (0.5 to 10 Hz)
Pulse Generator Level:  0 V to 5 V
DC Mode:  + DC or - DC
Pulse Mode:  + Pulse, - Pulse, or both; adjustable, duty cycle
Display 2.8 in (7.0 cm) diag CRT
Dimension

Weight: 6.5 lb
Size: 100 mm (4.0 in) H x 230 mm (9.0 in) W x 280 mm (11.0 in) D