Tech FrontPage

 
     Plug-n-Play for embedded electronics
The PlugIO name and logo, the PlugIO logo are registered trademarks of Inteltium Technology Sdn Bhd in Malaysia and other countries. All other trademarks mentioned herein are property of their respective companies.
  

PlugIO™ Intelligence
PLI-001 PLI-001 PIC16F84 series Microcontroller
- supplied with Microchip PIC16F84A microcontroller with 20MHz crystal
- On-chip 1792 program Flash, 68 RAM, 128 EEPROM
- 2 units PlugIO™ Direct I/O interface (total 13 I/O)		  
PLI-002 PLI-002

PIC16F87x series Microcontroller
- supplied with Microchip PIC16F877A microcontroller with 20MHz crystal
- On-chip 14336 program Flash, 368 RAM, 256 EEPROM
- 3 units PlugIO™ Direct I/O interface (total 24 I/O), 1unit PlugIO™ Synchronous Serial Interface (I2C and SPI), 1 unit PlugIO™ Asynchronous Serial Interface (TTL RS232 shared with MAX232)
- 1 unit on-board RS232
- Can be supplied pre-programmed with Bootloader.
PLI-003 PLI-003 PIC12Fxxx series Microcontroller
- supplied with Microchip PIC12F675 microcontroller with built-in 4MHz oscilator
- On-chip 1792 program Flash, 64 RAM, 128 EEPROM
- 1 unit PlugIO™ Direct I/O interface (total 5 I/O), 1unit connector with 1 fix input.		  
PLI-004 PLI-004

RCM2000 series Core Module (Rabbit 2000 Microprocessor)
- Rabbit 2000 is an improved version of the Z80 microprocessor
- Rabbit 2000 at 25.8 MHz (supplied with RCM2010 core module)
- On Board 256K Program Flash, 128K RAM
- Battery Connector for backup of on-chip RTC (Real-Time-Clock) and on-board RAM
- On-chip watchdog and on-board 2 units RS232
- On-board connector for programming from computer serial port and built-in In-Circuit-Debugger (ICD) through Dynamic C Compiler without additional hardware. Support breakpoint, watch and single-stepping.
- 2 units PlugIO™ Direct I/O interface (total 16 I/O), 1unit PlugIO™ Synchronous Serial Interface (I2C and SPI), 1 unit PlugIO™ Asynchronous Serial Interface (TTL RS232 shared with MAX232), 1 unit Direct I/O connector (with fix 6 Inputs)

  
PLI-005

BL1800 series Single Board Computer (Rabbit 2000 Microprocessor)
- Rabbit 2000 is an improved version of the Z80 microprocessor
- Rabbit 2000 at 29.5 MHz (supplied with BL1800 Single Board Computer)
- On Board 256K Program Flash, 128K RAM
- On-board battery for backup of on-chip RTC (Real-Time-Clock) and on-board RAM
- On-chip watchdog, on-board 2 units RS232, 1 unit screw terminal for half-duplex RS-485
- On-board connector for programming from computer serial port and built-in In-Circuit-Debugger (ICD) through Dynamic C Compiler without additional hardware. Support breakpoint, watch and single-stepping.
- 2 units PlugIO™ Direct I/O interface (total 16 I/O), 1unit PlugIO™ Synchronous Serial Interface (I2C and SPI), 1 unit PlugIO™ Asynchronous Serial Interface (TTL RS232 shared with MAX232), 1 unit Direct I/O connector (with fix 6 Inputs), 1 unit connector with 2 PWM, 1 ADC and 4 High-voltage capable output (60V max).

  
PLI-006 6809 Microprocessor  
PLI-007 RCM3000 series Core Module (Rabbit 3000 Microprocessor)
- Rabbit 3000 is an improved to the Rabbit 2000 microprocessor
- Rabbit 3000 at 29.4 MHz (supplied with RCM3010 core module)
- On Board 256K Program Flash, 128K RAM
- On-chip watchdog and on-board 2 units RS232
- On-board connector for programming from computer serial port and built-in In-Circuit-Debugger (ICD) through Dynamic C Compiler without additional hardware. Support breakpoint, watch and single-stepping.
- 3 units PlugIO™ Direct I/O interface (total 24 I/O), 1unit PlugIO™ Synchronous Serial Interface (I2C and SPI), 1 unit PlugIO™ Asynchronous Serial Interface (TTL RS232 shared with MAX232)
- RJ45 connector for 10Mbps Ethernet connection. TCP/IP stack programming supplied royalty-free on Dynamic C compiler.		  
PLI-008 Basic Stamp2 Microcontroller (BS2)  
  PLI-009 Basic Stamp2 Microcontroller (BS2p40) - product under revision  
PLI-010 AT89S8252 (8051-based) Microprocessor
- The AT89S8252 is based on the 89C51 but with 8K on-board Flash program memory, 2K EEPROM, 256 internal RAM
- 24 I/O provided by 8255 (24 I/O on the AT89S8252 are used to interface to external RAM and other peripherals)
- Battery backed-up 32K external RAM
- ISP (In Circuit Programming) from computer RS232 with downloader
- ICD (In Circuit Debugger) capable if purchased with SERIAL MONITOR PROGRAM from Crossware C Compiler or Keil C Compiler
- 3 units PlugIO™ Direct I/O interface, 1unit PlugIO™ Synchronous Serial Interface (SPI only), 1 unit PlugIO™ Asynchronous Serial Interface (TTL RS232 shared with MAX232)
- 5V supply or unregulated 9V/12V supply, ON/OFF switch.		  
PLI-011 AT89S8252 (8051-based) Microcontroller
- The AT89S8252 is based on the 89C51 but with 8K on-board Flash program memory, 2K EEPROM, 256 internal RAM
- Direct interface to AT89S8252 port (P0, P1 and P2) since no external RAM and periperals
- ISP (In Circuit Programming) from computer RS232 with downloader
- ICD (In Circuit Debugger) capable if purchased with SERIAL MONITOR PROGRAM from Crossware C Compiler or Keil C Compiler
- 3 units PlugIO™ Direct I/O interface, 1unit PlugIO™ Synchronous Serial Interface (SPI only), 1 unit PlugIO™ Asynchronous Serial Interface (TTL RS232 shared with MAX232)
- 5V supply or unregulated 9V/12V supply, ON/OFF switch.